Connect

Connect

with a Cardinal Health representative

877.227.3462

Thank you for connecting with us.
 
 
 
 
 
*
 
 
   
Please fill out this field

Bath Grab Bar

Ideal for shower, tub, or toilet

  • Heavy-gauge steel construction offers strength and durability
  • Helps enhance safety by providing a secure grip
  • Not Made with Natural Rubber Latex
  • Weight capacity: 300 lb.

Product Description

Ideal for shower, tub, or toilet

  • Heavy-gauge steel construction offers strength and durability
  • Helps enhance safety by providing a secure grip
  • Not Made with Natural Rubber Latex
  • Weight capacity: 300 lb.

Warning:

Know your installation requirements. For best performance, select a grab bar length that allows for both ends to be securely anchored into wall studs. When both ends cannot be secured into wall studs, ensure that at least two of the three mounting screws on one end of the grab bar secures into wall studs and use wall anchors to secure the other end to the wall.

Contents:

(1) – Wall grab bar

(6) – #12 x 2-inch screws

(6) – Wall anchors

(2) – Gaskets

Additional hardware may be required depending on your installation requirements.

Tools required:

Stud finder
Power drill
9/64-inch drill bit
Phillips screwdriver

Note: Before drilling into any surface, be sure to select the correct type of drill bit best suited for the material you are drilling. 

Recommend to use with*:

*Items sold separately

Toilet Safety Frame
Shower Chair

100% Satisfaction Guarantee

At Cardinal Health, we stand behind our products with a 100% satisfaction guarantee.  If for any reason you are not satisfied with your purchase, contact the healthcare provider or retailer where it was obtained for a replacement or refund. You can also contact us directly at 1-877-227-3462. 

Product Options

SKU

SIZE

FINISH

CGBC0012R

12”

Chrome

CGBC0016R

16”

Chrome

CGBW0012R

12”

White

CGBW0016R

16”

White

Instructions For Use

Instructions for Use:

Do Not Attempt To Install Or Adjust Your Grab Bar Without Reading All Instructions Carefully. Failure To Follow Instructions May Result In Injury.

To Install:

1. Remove grab bar from package, setting aside screws, wall anchors, and gaskets.

2. Using a stud finder, locate wall studs. For best performance, the screw holes of the grab bar MUST be aligned so that at least two of the three mounting screws on each end of the grab bar passes through the wallboard or tile and secures into the wall studs. If both ends cannot be secured into wall studs, ensure that at least two of the three mounting screws on one end of the grab bar secures into wall studs. Use wall anchors to secure the other end to the wall.

3. Place grab bar at desired position and hold it stationary. Use a pencil to mark the screw hole positions on each end of the grab bar. Set grab bar aside.

4. Use power drill and 9/64-inch drill bit to drill all holes at marked positions.

Note: Select the best suited drill bit designed to drill into your type of tile and sized to fit the wall anchors. After drilling holes, tap wall anchors into holes. 

5. Place the grab bar against wall, sliding a gasket between each end of the grab bar and wall. Align mounting holes and gasket holes with holes in the wall and/or holes containing wall anchors.

6. Insert screws into one side of the grab bar. HAND TIGHTEN ONLY.

7. Insert screws into opposite end of grab bar, then securely tighten mounting screws on both ends.

Contents:

Additional hardware may be required depending on your installation requirements.

(1) Wall grab bar (12 inches long, 1 inch in diameter)

(6) #12 x 2-inch screws

(6) Wall anchors

(2) Gaskets

Tools required:

Stud finder
Power drill
9/64-inch drill bit
Phillips screwdriver

NOTE: Before drilling into any surface, be sure to select the correct type of drill bit best suited for the material you are drilling. 

Warning:

To provide optimum safety and function, it is highly recommended that location, size, and angle of bar be determined by a qualified professional

Proper installation is extremely important. Special fasteners may be required if wood is not in desired location.  If in doubt about any step of the installation process, installation should be conducted by a qualified professional.

For best performance, select a grab bar length that allows for both ends to be securely anchored into wall studs. When both ends cannot be secured into wall studs, ensure that at least two of the three mounting screws on one end of the grab bar secures into wall studs. Use wall anchors to secure the other end to the wall.

Standard measurement of wall studs is 16 inches between centers (Figure 2). Because older homes may not always comply with current codes, it is recommended that wall studs are located using a stud finder, which may be obtained from any hardware store.

When drilling into the wall, use extreme caution and avoid all electrical wiring and plumbing located behind the wall. Damaged electrical wiring can cause electrical shock and fire. Because older homes may not always comply with current codes, it is recommended that internal wall wiring and plumbing be established before installation so that there is no interference with installation.

If installing grab bar over tile, select the best suited drill bit designed to drill into your type of tile and sized to fit the wall anchors. 

To Use:

Grasp the grab bar firmly when utilizing. Note that grab bars are for assistance only and are not designed to support an individual's total weight.

Warning:

Do Not Attempt To Install Or Adjust Your Grab Bar Without Reading All Instructions Carefully. Failure To Follow Instructions May Result In Injury.

Consult with your healthcare provider if:

  • You require additional instruction on the proper use of this product.
  • You have any disability or physical limitation or are taking any medication that could cause interference with the safe use of this product.

Do not exceed the maximum weight capacity or serious injury may result.

Grab bars provide enhanced safety and security when attached as recommended.

Use EXTREME caution on wet tub or floor surfaces.

Ensure grab bar is correctly and securely installed. NEVER use grab bar if any looseness is noted.

Grab bars are for assistance only and are not designed to support an individual's total weight.

To ensure optimum safety, it is recommended that you contact a qualified tradesman for installation.

Ensure all screws have been securely tightened before use, as well as after any adjustments or repairs have occurred.

If any component of this product is damaged or missing, discontinue use immediately. Contact Cardinal Health at 1-877-227-3462 for repair and/or appropriate replacement parts. DO NOT use non-Cardinal Health™ parts.

Use Cardinal Health™ accessories only. The use of other manufacturers' accessories can result in an improper fit and risk of fall and/or injury.

Failure to follow the above instructions may result in serious injury and/or damage to the product. Cardinal Health assumes no responsibility for any injury or damage caused by improper installation, assembly, or use of this product.

General Care:

To ensure that your grab bar will have a long service life, inspect it regularly and follow these general maintenance tips:

Clean with mild soap and water at least once a week. Do not use an abrasive cleaner that will scratch the finish.

Before each use, ensure that grab bar is securely installed. NEVER use grab bar if any looseness is noted.

To guarantee the best service from your product, contact Cardinal Health at 1-877-227-3462 for more information. DO NOT use non-Cardinal Health™ parts.